mbr1520 thru mbr15100 15 amp schottky barrier rectifier features maximum ratings ? operating temperature: -55 c to +150 c ? storage temperature: -55 c to +150 c mbr1520 mbr1520 20v 14v 20v mbr1530 mbr1530 30v 21v 30v mbr 1535 mbr1535 35v 24.5v 35v mbr1540 mbr1540 40v 28v 40v mbr1545 mbr1545 45v 31.5 45v mbr1560 mbr1560 60v 42v 60v mbr15100 mbr15100 100v 70v 100v electrical characteristics @ 25 c unless otherwise specified average forward current i f(av) 15a t c = 125 c peak forward surge current i fsm 150a 8.3ms, half sine maximum forward voltage drop per element v f .63v i fm = 15 amper t a = 25c maximum dc reverse current at rated dc blocking voltage ir ? metal of silicon rectifier, majority carrier conduction ? guard ring for transient protection ? low power loss high efficiency ? high surge capacity, high current capability to-220ac 20 to 100 volts mbr1580 mbr1580 80v 56v 80v mbr1520-1545 mbr1560 .75v 0.2 ma t j = 25 c mbr1580-1500 .84v
omp onents 2 0736 marilla street chatsworth
mcc revision: 7 2008/01/01 a b c k j i g f d n m l h pin 1 pin 2 case pin 12 inches mm
a .560 .625 14.22 15.88 b .380 .420 9.65 10.67 c .100 .135 2.54 3.43 d .230 .270 5.84 6.86 f ------ .250 ------ 6.35 g .500 .580 12.70 14.73 h .190 .210 4.83 5.33 i .020 .045 0.51 1.14 j .012 .025 0.30 0.64 k .139 .161 3.53 4.09 l .140 .190 3.56 4.83 m .045 .055 1.14 1.40 n .080 .115 2.03 2.92
tm micro commercial components www. mccsemi .com 1 of 3 mcc catalog number device marking maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage ? lead free finish/rohs compliant(note 1) ("p" suffix designates rohs compliant. see ordering information) ? case material: molded plastic. ul flammability classificationrating94v-0 and msl rating 1 notes:1.high temperature solder exemption applied, see eu directive annex 7.
mbr1520 thru mbr15100 instantaneous reverse leakage current - microamperes versus percent of rated peak reverse voltage - volts average forward rectified current - amperes versus ambient temperature - c figure 3 forward derating curve 25 50 100 125 150 0 0 5 7 9 single phase, half wave 60hz resistive or inductive load amps c 75 11 13 15 instantaneous forward current - amperes versus instantaneous forward voltage - volts figure 1 typical forward characteristics volts 4 6 20 10 amps . 2 .7 .3 .4 .5 .6 .01 .02 .04 .06 .1 .2 .4 .6 1 2 25 c 40 60 100 .8 figure 2 typical reverse characteristics volts .4 .6 2 1 amps 20 150 50 75 100 125 .001 .002 .00 4 .006 .01 .02 .04 .06 .1 .2 4 6 10 175 t j =25 c mcc 1 100 4 0 25 50 75 8 figure 4 peak forward surge current peak forward surge current - amperes versus number of cycles at 60hz - cycles amps cycles 2 61020 60 80 40 100 125 150 mbr1580-15100 mbr1520-1545 mbr1560 revision: 7 2008/01/01 tm micro commercial components www. mccsemi .com 2 of 3
mcc revision: 7 2008/01/01 tm micro commercial components www. mccsemi .com 3 of 3 products are represented on our website, harmless against all damages. ***applications disclaimer*** ***important notice*** aerospace or military applications. products offer by micro commercial components corp . are not intended for use in medical, micro commercial components corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose ordering information device packing (part number)-bp bulk;1kpcs/box
|
